Model: 1600

1.6 metre (5'3") cut twin drum 3 point linkage machine recommended for smaller holdings and light tractors. A minimum of 30 HP is recommended to

Model: 2070

2.07 metre cut (6' 9") cut twin drum 3 point linkage machine recommended for medium holdings and small tractors. A minimum of 45 HP is recommended to power the 2070.

Model: 2400

The 2400 is the largest of the manually folded drum mowers @ 2.4 metre cut (8' 0") cut. This twin drum 3 point linkage machine is recommended for medium holdings and medium tractors for those requiring the price advantage of a manual fold machine.

Model: 2400HL

The 2400 HL @ 2.4 metre cut (8' 0") cut, adds the ease and convienence of hydraulic lift. This twin drum 3 point linkage machine is recommended for medium holdings and medium tractors . A minimum of 65 HP is recommended to power the 2400.

Model: 3100TM

The Reese 3100 is used throughout the World especially in situations where a disc mower simply could not operate for long without damage. A trailed machine the 3100 has hydraulic height adjustment and hydraulic swing into cutting position. Cutting width i

Model: 3400

The 3400 is a 3.4 metre (11'2") cut trailed mower. The big brother to the 3100 this is a very heavy duty machine designed for fast, continuous operation even under less than ideal conditions. 4 heavy duty construction rotors carrying a total of 12 bla

Model: TS1350

The Agrispred TS1350 is a 3 point linkage mounted machine which has a capacity of 1320 litres (46.6 cu ft) This equates to around 1000kg (2204lbs) of granulated urea.

Model: ARD10VT

Front folding frame transfers weight to the tractor (optional extendable drawbar). Rubber mounted fully greaseable shaft roller bearings to reduce premature failure.

Model: ARD9VT

Front folding frame transfers weight to the tractor. Unique rubber mounted greaseable roller bearings on 75mm (3”) high tensile shafting.

Model: RH2200

The Reese RH2200 heavy duty bale handler or "soft grab/hands" especially designed to handle plastic wrapped bales without damage, is the class leading accessory of choice for the Farmer and Contractor who requires the strongest, most versatile machine aro

Model: BTK80

Our new harvesters are using more positive bucket turnover systems

Model: R3000 or R3300

The basic Cambridge roller is available in either 2,7m (9ft) or 3.0m (10ft) widths. The drawbar is foldable although a telescopic unit is optional. These "no frills" units are very popular for those wishing to finalise a firm seedbed or for any of those m

Model: CKP

Smoother rounded edges are much gentler on vines. The raised lip allows the plates to slide more freely (less frictional area) to the closed position

Model: WT6868 or WT7774

The Aitchison wideline cultivator is designed as a finishing machine for field cultivation.

Model: EC10C

A roller drill for the cost conscious farmer. Large seedbox with the unique Aitchison sponge seed feed mechanism to sow all seed. Very accurate, infinitely variable "gearbox" allows for sowing rates as low as 1kg/ha and up to 350kg/ha (0.9lb/acre and up t

Model: FRU

New fan rotors with curved tip blades have proved at least 10% more efficient over our old design

Model: FK

Much development has been directed towards fan improvements